OPERATION
L025317 Issue 5 July 2014 3-19
Production Line Setup
Home > Settings > Production Line Setup
Set:
• Printer Orientation: Rotates the print head and/or product to set the
correct orientation. One may mirror the print. Set the vector sorting
direction in such a way that marking is processed in the opposite
direction to the direction in which the product is moving. If “none” is
selected, the vectors will be processed in the normal marking order of
the objects.
• Print Field: Sets the usable dimension and scanner dimension of the
print field width, height and centre point. Set restriction for the print
field. Trigger a test print to measure the field to setup the field size
• Optics: Select the correction matrix for the used scanner and lens
configuration and make a test print of it. Select the tube distortion axis
to mark round objects.
• Line Movement: Product Line Movement: Static or mark on the fly.
Encoder Setup: Source, scale delay and field usage PN
Transformation. Product Distance: Maximum distance and print start
ignore distance see “Product Distance and Print Start - Ignore
Distance” on page 2-61.
• Print Trigger: Product Detect. Continuous Printing: Trigger a print by
given time interval. Debounce Settings: Set the ramp times.
• Shift Register: Enable the shift register between trigger signal and print
on the product and set the depth.
To Next Page
Loading...
Need help?
General
