OPERATION
3-24 L025317 Issue 5 July 2014
Clocks/Dates
Home > Settings > Global Print Settings > Clock/Dates
• Julian Leap Day: February 29th is marked as either 060 or 366
depending on the setting for the Julian Leap Day.
• Expiration Update: Selects between midnight, after last shift and until
first shift. After last shift updates the clocks at the end of the last shift
even if that shift spans across midnight and into the next day. Until first
shift updates the clocks at the beginning of the first shift even if the
first shift occurs before midnight of the previous day.
• Week Begin Day: Selects a day of the week that is day 1 of each week.
• Time Granularity [ms]: Defines the time accuracy and time after which
clocks are re-compiled. Every clock is re-compiled after the time set
here. Computing power may be saved by setting a higher value for the
granularity.
• Alpha Hours: Sets the string used by the Alpha Hour (h) time
component. Defaults to A-Z (no I or O).
• Alpha Week Days: Sets the Alpha Day encoding string. Defaults to
ABCDEFG. First letter corresponds to the “Week Begin Day”.
• Alpha Month Day: Sets the Alpha Month Day encoding string. Defaults
to 1234567890ABCDEFGHJKLNPQRSTVXYZ. First component
corresponds to the “Week Begin Day”.
• Month Names: The Month Names can be edited in the Month Names
dialogue box for later inclusion in a message.
• Month Short Names: The Month Short Names can be edited in the
Month Short Names dialogue box for later inclusion in a message.
To Next Page
Loading...
Need help?
General
