Doosan DB33A - Oil Pan; Cylinder Head Cover; Water Pump Assembly; Thermostat Housing Assembly

55
132
Important operation
¡¡ ‹
Oil pan (1)
-Apply liquid gasket to the cylinder block and oil pan.
-Install oil pan gasket and oil pan.
¡¡ ‹
Cylinder head cover (2)
Tighten the bolts as shown in the figure.
¡¡ ‹
Water pump assembly (3)
Apply liquid gasket(belco bond No. 4) to the water
pump gasket before installing the water pump.
¡¡ ‹
Thermostat housing assembly (5)
Apply liquid gasket
to the cylinder block side
Bolt torque (kgƒUm)
1.6
(11.6 lb¡⁄ft)
Bolt torque (kgƒUm)
2.1
(15.2 lb¡⁄ft)
Bolt torque (kgƒUm)
5.3
(38.3 lb¡⁄ft)