Doosan DL200 - Engine Start and Stop

OP000508Operation
3-2
ENGINE START AND STOP
Engine Start
1. Set parking brake switch to "I" (APPLIED) position.
This will ensure that the parking brake is "APPLIED."
2. Move all control levers to "NEUTRAL" position.
3. Make sure transmission neutral lock is in the "N"
(NEUTRAL LOCK) position.
Figure 1
HA0O2019
P
O
I
FG003979
Figure 2
IMPORTANT
If transmission lever is not in "NEUTRAL" position,
engine will not start.
FG003980
Figure 3