OP000506
1-13
Safety
UNAUTHORIZED
MODIFICATIONS
Any modification made without authorization or written
approval from DOOSAN can create a safety hazard, for
which the machine owner must be held responsible.
For safety's sake, replace all OEM parts with the correct
authorized or genuine DOOSAN part. For example, not
taking the time to replace fasteners, bolts or nuts with the
correct replacement parts could lead to a condition in which
the safety of critical assemblies is dangerously compromised.
GENERAL HAZARD
INFORMATION
Safety Rules
Only trained and authorized personnel can operate and
maintain the machine.
Follow all safety rules, precautions and instructions when
operating or performing maintenance on the machine.
Do not operate the machine if you are not feeling well, if
you are taking medication that makes you feel sleepy, if you
have been drinking, or if you are suffering from emotional
problems. These problems will interfere with your sense of
judgement in emergencies and may cause accidents.
When working with another operator or with a person on
work site traffic duty, be sure that all personnel know the
nature of the work and understand all hand signals that are
to be used.
Always observe strictly any other rules related to safety.
Safety Features
Be sure that all guards and covers are installed in their
proper position. Have guards and covers repaired
immediately if damaged.
Be sure that you understand the method of use of safety
features such as transmission lever neutral lock and the
seat belt, and use them properly.
Never remove any safety features. Always keep them in
good operating condition.
Failure to use safety features according to the instructions in
the Operation and Maintenance Manual could result in
serious bodily injury.
To Next Page
