OP000509
4-87
Inspection, Maintenance and Adjustment
• Tire layers are separated.
• Radial cracks reach the carcass.
• Deformation or damage which makes the tire
unsuitable for use.
Recommended Air Pressure
The recommended tire pressures are based on the rated
load for each handling case.
In case of heavier loads, especially during loading and
carrying operations, a higher tire pressure is required.
Contact the tire manufacturer for information about which air
pressure is the correct one for the load to be handled and
transported over a particular distance.
If L5 tires are used for loading and carrying operations, due
attention must be paid to the transporting distances. Radial
tires are to be preferred for loading and carrying operation,
as the buildup of heat is less in this type of tire.
Tires
Working Pressure Driving Pressure
Remarks
Front Rear Front Rear
Bias Ply Tire
4.2 Bar
(60
psi)
3.5 Bar
(50
psi)
4.2 Bar
(60
psi)
3.5 Bar
(50
psi)
20.5-25-16PR
(Standard)
Radial Ply Tire
3.5 Bar
(50
psi)
3.0 Bar
(43.5
psi)
3.5 Bar
(50
psi)
3.0 Bar
(43.5
psi)
20.5R25
(Option)
+0.1
+0
+2
+0
+0.1
+0
+2
+0
+0.1
+0
+2
+0
+0.1
+0
+2
+0
+0.1
+0
+2
+0
+0.1
+0
+2
+0
+0.1
+0
+2
+0
+0.1
+0
+2
+0
To Next Page
