OP000506Safety
1-16
Recommendations for Limiting Vibrations
1. Select the right machine, equipment and attachments
for a particular application.
2. Replace any damaged seat by a genuine DOOSAN
part. Keep the seat maintained and adjusted.
• Adjust the seat and suspension for the weight and
size of the operator.
• Inspect and maintain the suspension and
adjustment mechanisms of the seat regularly.
3. Check that the machine is properly maintained.
• Tire pressure, brakes, steering, linkages, etc.
4. Steer, brake, accelerate, shift gears, move the
attachments and load the attachments smoothly.
5. Adjust the machine speed and travel path to reduce
the vibration level.
• Slow down if it is necessary when passing rough terrain.
• Drive around obstacles and excessive rough
terrain conditions.
6. Keep the terrain on work sites where the machine is
working and traveling in good condition.
• Remove any large rocks or obstacles.
• Fill any ditches and holes.
• Provide machines for and schedule time to
maintain the terrain conditions.
7. Travel over longer distance (e.g. on public roads) at
adjusted (medium) speed.
• Always adjust the speed for preventing bouncing.
Asbestos Dust Hazard Prevention
Asbestos dust can be HAZARDOUS to your health if it is
inhaled. Materials containing asbestos fiber can be present
on work site. Breathing air that contains asbestos fiber can
ultimately cause serious or fatal lung damage. To prevent
lung damage from asbestos fiber, observe following
precautions:
• Use a respirator that is approved for use in an
asbestos-laden atmosphere.
• Never use compressed air for cleaning.
• Use water for cleaning to keep down the dust.
• Work on the machine or component with the wind
at your back whenever possible.
• Always observe any rules and regulations related
to the work site and working environment.
Figure 3
ARO1770L
To Next Page
