Doosan DV11 - Cam Shaft & Tappet; Cylinder Liner; Oil Spray Nozzle

DV11
Operation and Maintenance
68
Engine Disassembly
Printed in Mar. 2005 PS-MMA0608-E1A
NOTES:
Do not mingle with the metal
bearings and bearing caps
randomly. To prevent mixing,
temporarily assemble the metal
bearings to the corresponding
bearing caps in turn.
3.1.38. Cam shaft & tappet
z Pull out the tappets from the cylinder
block.
z Remove the camshaft being
careful not to damage the
camshaft and its bearings.
3.1.39. Oil spray nozzle
z Remove the oil injection nozzle fixing
bolts and tear down the oil injection
nozzles.
3.1.40. Cylinder liner
z By means of a special tool
(Extractor), pull out the liner from the
cylinder block.