DORMA CS 80 MAGNEO
2
Dear customer,
Thank you for buying a product from our product range.
The DORMA brand stands for first-class and scrutinised quality products offering extremely
high safety standards.
This documentation contains important information for the safe installation of the system.
Please read these instructions thoroughly before you mount, install and use the
CS 80 MAGNEO.
Keep these instructions for further reference and make them available to other users.
Yours faithfully,
The DORMA-Team
Required tools:
Additionally for DORMA MANET fixing:
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Tape measure or folding rule respectively
Water level
Pencil
Drilling machine
Masonry drill bitØ6mm
Metal drill bitØ3and8mm
Socket wrench (10 mm)
Flat-bladed screwdriver for connection terminals of control unit.
Crosstip screwdriver for countersunk screws of wall connection.
Allen key, 4mm
Combination wrench, wrench size 10 mm and 13 mm
Long-nosed pliers for connection to terminals.
Adequate screws and wall plugs for the prevailing structures,
in case they are not made of brickwork or concrete.
Allen key, 3 mm and 5 mm
Translation of the original documentation
To Next Page
Loading...
Need help?
General
