Dorma CS 80 MAGNEO Technical Documentation

DORMA CS 80 MAGNEO
4
1. Safety Instructions
1.1 Specified standard operation
CS 80 MAGNEO
1.2 Product-specific characteristics
neither nor
nor
1.3 Standards, laws, codes and regulations
CS 80 MAGNEO as low-energy product according to German DIN 18650
(German Industrial Standard)
Reduced operating speeds (reduced dynamic forces at the door panel/contact forces)
Force limitation (reduced static forces at the door /contact forces)
Danger spots at closing edges
Required protection equipment for CS 80 MAGNEO according to DIN 18650
The is only designed to open and close
Do not allow children to play with the or rigidly mounted adjustment and/or
control devices. Keep remote controls out of reach of children.
.
The is suitable for application in escape routes, on fire and
smoke doors on exterior doors.
According to the German Industrial Standard DIN 18650, the movement range of an
automatic door always has to be protected (amongst others) by safety sensors.
However, there are special requirements for low-energy systems.
The meets the requirements of a low-energy operator according to the
standard by fulfilling the following requirements:
Automatic doors might cause hazards
by crushing, shearing, hitting and
drawing-in at the different
closing edges.
The German Industrial Standard DIN 18650 stipulates different requirements regarding
the protection of the above-mentioned danger spots.
Systems with CS 80 MAGNEO offer the following benefits:
The system does not have to be equipped with additional protection equipment (not
compulsory).
The application of safety sensors at the closing edges as additional protection measure is
optional and lies in the discretion of the person performing the installation of the door
system - under consideration of the result of the individual risk assessment (please also
refer to Risk assessment , page 4).
Altogether the system offers a high safety standard!
small and light interior doors
with an admissible weight from 20 kg to 80 kg per door panel.
A door kit is provided to make the connection with the door leaf.
Automatic doors might cause hazards by crushing, shearing, hitting and drawing-in.
Depending on the structural conditions, the door version and the safety equipment,
residual risks cannot be excluded.
CS 80 MAGNEO
CS 80 MAGNEO
Residual risks
CS 80 MAGNEO
panel
·
·
·
·
·
Main
closing edge
Secondary
closing edge

Dorma CS 80 MAGNEO Specifications

General

Brand	Dorma
Model	CS 80 MAGNEO
Category	Door Opening System
Language	English