Dorma CS 80 MAGNEO Technical Documentation

DORMA CS 80 MAGNEO
8
Express-Function
2.6 Safety functions
Static forces in Low-Energy-Mode
Opening cycle
Closing cycle
The door can be moved manually in ist
operational direction and there will be no
extra resistance. However, when the
maximum speed is exceeded, the operational
resistance will increase in line with the
speed by which it is exceeded. As soon as
the user has released the door panel, the
operator will softly slow it down to maximum
speed. This function is activated during all
opening and closing cycles.
The system does not exceed a value of 67 N
during opening and closing cycles.
As soon as the door hits an obstacle during
an opening cycle, it will immediately stop
and remain in its position for 3 seconds.
Then the operator will try to continue the
opening cycle. If the door panel hits an
obstacle three times during an opening
cycle, it will close.
When the door panel hits an obstacle while
closing, it will immediately stop and perform
an opening cycle.
2.7 Safety sensors
2.8 Power failure
You can install sensors to detect obstacles.
According to DIN 18650, an automatic
sensor test can be activated or deactivated
via the DIP switches located inside the
operator.
The door will stop immediately when the
sensor detects an obstacle during an
opening cycle and will continue the cycle as
soon as the obstacle has been removed. In
case the obstacle is not removed, the door
will close on expiry of the adjusted hold-
open time.
The door will stop immediately and reverse
when the sensor detects an obstacle during
an closing cycle. This function is not
activated while the door is in "closed"
position (then the sensor is deactivated).
In the event of a power failure, the door can
be opened and closed by hand.
As soon as the voltage returns, the operator
will automatically perform a position
initialization.
However, in this case the operator does
not slow down (brake) the door panel, so
that the user has to move (hold) it all
the way by hand.
During this position initialization, it is
essential that the movement range of
the door is free of obstacles.

Dorma CS 80 MAGNEO Specifications

General

Brand	Dorma
Model	CS 80 MAGNEO
Category	Door Opening System
Language	English