Dormakaba 2725-K6 - Securing battery holder; Mounting outside lever handle

InstallationTechnical Manual
1708/2017 dormakaba c-lever compact
4.5 Securing the battery holder more tightly
The battery holder can be secured more tightly using a screw.
The screw (M2.5x6) is not included in the scope of delivery.
Use of the battery holder locking screw increases the amount of effort involved in replacing
the batteries, see Dismantling [}4.12].
1.
2. 3.
1. Remove the flexible support plate.
2. Secure the battery holder with the battery holder locking screw (M2.5x6).
3. Attach the flexible support plate.
4.6 Mounting the outside lever handle
1. Position the guide ring on the mechatronics unit.
2. Attach the lever handle in the desired position on the square.
3. Screw the M6x8 threaded pin (with threadlocker) into the lever handle and secure in
place.