Service Technical Manual
32 08/2017dormakaba c-lever compact
8.2 Connecting the programmer
• Connect the c-lever and programmer using the programming cable.
8.3 Configuration and traceback
For correct time management, the clock time and the date on the device must be up-to-date.
c-lever compact with wireless module and activated wireless option:
Configuration, updates (e.g. the clock time) and traceback read-outs are performed by the
system software via wireless gateway.
c-lever compact with wireless module and deactivated wireless function:
Configuration, updates (e.g. the clock time) and traceback read-outs are performed using the
programmer.
The traceback is transmitted from the programmer to the system software for evaluation.
See also [}1.4] > Programmer
c-lever compact without wireless module:
Configuration, updates (e.g. of the clock time) and traceback read-outs are performed using
the programmer.
The traceback is transmitted from the programmer to the system software for evaluation.
See also [}1.4] > Programmer
Also see about this
2 1.4 Supplementary documentation [}5]
To Next Page
Loading...
