Technical Manual
308/2017 dormakaba c-lever compact
1 About this document 5
1.1 Target group 5
1.2 Validity 5
1.3 Contents and purpose 5
1.4 Supplementary documentation 5
1.5 Abbreviations/definition of terms 7
1.6 Hazard categories 8
1.7 Notes 8
1.8 Symbols 8
2 Basic safety instructions 9
2.1 Designated use 9
2.2 Product changes 9
2.3 ESD prevention measures 9
2.4 Handling of lithium batteries 10
2.5 Dealing with powerful magnets 10
3 Product description 11
3.1 Overview 11
3.2 Structure 11
3.3 Scope of delivery 12
3.4 Technical data 12
3.4.1 Dimensions 14
3.4.2 Conformity 14
4 Installation 15
4.1 Check minimum distance 15
4.2 Drilling fixing holes 15
4.3 Inserting the battery holder 16
4.4 Additional torsion lock 16
4.5 Securing the battery holder more tightly 17
4.6 Mounting the outside lever handle 17
4.7 Mounting the spindle 18
4.8 Inserting the c-lever into the lock 18
4.9 Mounting the inside rosette and lever handle 18
4.10 Removing the protective film 19
4.11 Switch off 'Bolt Recreation Time' 19
4.12 Dismantling 20
4.12.1 Dismantling the inside rosette and lever handle 20
4.12.2 Removing the inside lever handle from the rosette 20
4.12.3 Removing the c-lever from the lock 20
4.12.4 Removing the battery holder locking screw 20
4.12.5 Removing the outside lever handle 20
5 Programming 21
5.1 Initial programming of MRD components 21
5.2 Master media 21
5.3 User media 21
5.4 Program structures 22
5.5 A/B and B structures 22
5.6 Programming user media with B masters 23
5.7 Deleting individual user media 24
5.8 Deleting individual B masters 25
5.9 Deleting all user media 26
To Next Page
Loading...
