2
EML Header Shim 07-2019
933903
dormakaba Header Installation Instructions with EML310/320 and 371/372
For use with DRS Rails and Patching Fittings (4-1/8”, 4-1/2”, 6” Headers)
Table of Contents
Table of contents
1 Technical specifications 3
. RTS and PT Header
Specification Overview
.. General information
.. Glass requirements/fittings/mounting
.. Requirements for glass panel
.. Safety instructions
.. Symbols used - Safety/Installation
.. Maintenance, care, repair
.. Disposal
. EML and EML Specifications Overview
.. General information
.. Listings
.. Conditions of acceptability
.. EML/ Mechanical specifications:
(Including /” [.] mounting bracket)
.. EML/ Mechanical specifications:
(Including /” [.] mounting bracket)
.. Environmental specifications:
.. EML/ Electrical specifications:
.. EML/ Electrical specifications:
.. Inspection and Maintenance
. EML header options
. Pin diameter specifications
2 RTS88 and PT21 installation instructions 8
. Install header for single or double door: RTS
. Install header for single or double door: PT
. RTS adjustments
. PT adjustments
3 EML and shim installation instructions 11
. Prepare/disassemble mag lock body
and mounting plate
. Secure header shim to frame/ceiling surface
(for -/” or -/” headers only)
. Secure mounting bracket and mag lock to shim
(for -/” or -/” headers only)
. Secure mounting bracket and mag lock to shim
(for ” headers only)
4 Install armature plate 14
. (For use with patch fittings only)
secure glass door bracket (GDB)
. (For use with DRS rails only)
5 EML310/320 and 371/372 Options 16
. Instant release of lock
. Lock monitoring options - BA -
Bond Alert Sensor
. Lock monitoring options - DP -
Door Position Sensor
6 Wiring the EML 17
. Wiring mag lock body through header
(for EML/ and /)
. Wiring mag lock body
(for EML/) - continued
. Wiring for BA or BA DP combination models
(for EML/)
. Wiring for Unmonitored or DP sensor models
(for EML/)
7 EML310/320 and 371/372
trouble shooting guide 20
To Next Page
Loading...
