Dormakaba ES 250 PRO Easy - Mount the Tensioning Device; Cut the Toothed Belt T O Size

Mounting
5. Screw the protective conductor onto the right-hand bolt.
5. 6.
7.
Fig. 47
6. Screw the protective conductor onto the track profile.
7. Stick the protective conductor label onto the track profile.
4.14 Mount the tensioning device
1. Place the tensioning device on the threaded bolts on the attachment strip.
1.
2.
Fig. 48
2. Loosely screw the nuts and washer onto the bolts.
3. Position the tensioning device, see Fig. 3, Fig. 4 and Fig. 5.
4.15 Cut the toothed belt to size
1. Cut the toothed belt to size using the following formula:
Toothed belt length = 2 x CW + 725.
ES 250 PRO Easy
2024-03
33
ES250ProEasy Installation Manual