dormakaba USA Inc. System User Guide 7040.0321 | 17
3.7 Assign Time Lock Schedules
(704 & 705 Models Only)
This section outlines how to assign pre-loaded Schedules and view pre-loaded Holidays from the Keypad. To load specific
dates and times to Schedules and Holidays from the PC software. Refer to section 5.5 Add Time Lock Schedules for more
information.
The Time Lock feature can restrict access to a safe lock at specific times during the week or allow access for an entire
day, a day spans midnight to midnight of the next day.
Follow these steps to create time access periods from a week per lock or view Holiday lockout day(s):
1. Navigate through the Main Menu and select Time Lock.
2. To Assign Access, do the following:
a. Select Assign Access
b. For multi-lock Systems, select the lock by pressing the corresponding number on the number pad.
Otherwise, skip to the next step
c. Choose between 24/7 Access or a pre-loaded Schedule
3. To View Access, do the following:
a. Select View Access
b. Navigate through the information on screen with the arrow buttons
4. During a Holiday, the lock will not open at any time on the specified day(s). To view holiday(s), do the following:
a. Select View Holiday
b. Navigate through the information on screen with the arrow buttons
Note: If Time/Date is not set after a prolonged power outage, access time lock schedules cannot be enforced and may
result in the inability to open the lock until the time/date is set.
3.8 Users
3.8.1 Lock User Types
There are three types of users, each with different capabilities. The sub-sections outlined below cover each Lock User
Type and their respective functions.
3.8.1.1 Master
• There will always be 1 Master User per safe lock
• Combination length is always 8 digits and is not modified by the combination length system setting
• The default factory combination is 1-2-3-4-5-6-7-8
• The User ID is always 00 and cannot change
• Cannot open the lock directly
• Can change their combination either via the Keypad or the LA GARD Software client
• Needs to authenticate with an old combination prior to being allowed to update their combination
• The forced-change-on-first-use rule does not apply to Master combinations
• The Master combination should be changed from the default value prior to adding any other non-Master Users to
the System
3.8.1.2 Manager
• Should be enabled within the system, but not required
To Next Page