dormakaba USA Inc. System User Guide 7040.0321 | 31
1. While a safe lock is currently in a Time Delay, using the Keypad, input #74 + Authorized User ID and Combination +
Return Key.
2. The Keypad will beep three times and flash a green LED once complete.
3.11.4 Time Delay Override
For a user to execute a Time Delay Override, the lock itself must allow it. The Time Delay Period and Confirmation
Window period must be set.
There are two ways to perform a Time Delay Override:
1. The user must possess Time Delay Override w/ Combo privilege.
2. The user must possess Time Delay Override w/ fob privilege.
Refer to sections 3.8.2 Add User or 3.8.3 Edit User for information on how to give users Time Delay Override privileges.
3.11.4.1 Allow Time Delay Override – Display Keypad
Follow these steps to Allow Time Delay Override to a safe lock on a Display Keypad:
1. Navigate through the Main Menu and select System.
2. Select Locks from the sub-menu.
3. Select TimeDelay from the Locks menu.
4. Select ChangeOveride.
a. For multi-lock systems, select the corresponding lock number on the keypad
5. Allow Ovride? appears on screen. Choose between Yes or No.
6. Success OvrRde update appears on screen and the Keypad will beep three times and flash a green LED once
complete.
3.11.4.2 Allow Time Delay Override – Non-Display Keypad
Note: This function is not available on the 701 series of Keypad,
Follow these steps to Allow Time Delay Override to a safe lock on a non-Display Keypad:
1. Using the Keypad, input #73 + Master ID and Combination + Allowed (1) or Not Allowed (2) + Return Key.
2. The Keypad will beep three times and flash a green LED once complete.
3.11.5 Open Lock During Time Delay Using Override with Combo
3.11.5.1 Open Lock During Time Delay Using Override with Combo – Display Keypad
Follow these steps to Open a lock during a Time Delay using Override on a Display Keypad:
1. Using the Keypad, input the User ID and Combination.
2. For multi-lock systems, select the corresponding lock number on the keypad. Otherwise, skip to the next step.
3. Lock ‘N’ Start Delay will appear on screen where ‘N’ represents the lock number. The screen will then provide timer
feedback.
4. There is no continuous feedback. A key must be pressed to check on the Time Delay status. When a key is
pressed, the Keypad will display the feedback for the ‘most urgent’ lock.
5. Press a key to exit the Time Delay Status screen.
6. Input the User ID and Combination.
7. From the Time Delay Menu, select Open Lock.
a. For multi-lock systems, select the corresponding lock number on the keypad
b. If the selected lock has Time Delay and Time Delay Override enabled, and the User has Time Delay
Override w/ Combo privileges for the lock, then the lock will open
To Next Page