dormakaba USA Inc. System User Guide 7040.0321 | 33
o if the User has Override privileges, the lock will open
o if the User does not possess Override privileges, the lock will not open and will
remain in the Delay Period. The Keypad will return to the Time Delay ‘Wake-Up’
screen
• Selected Lock is in the Confirmation Window
o the Lock opens
o Cancel TD
the User is prompted to select the Lock which should have Time Delay cancelled. Only locks
with Time Delay active can be selected. The selected Lock will have Time Delay cancelled. The
Keypad returns to the Time Delay Menu
o FOB Override
only available if the Keypad has the BLE option AND user accessing the Time Delay menu has
open privileges
the User is prompted to select a lock. Only shows locks which:
• The User who logged on to show the Time Delay has Open permission AND has Time
Delay active AND allows for Time Delay Override
prompts the User to present the FOB to override the Time Delay
• If the FOB is authorized to override the Time Delay, the lock will open
Note: Rules for number and types of Users and Credentials apply when accessing the Time Delay Menu.
3.12 Battery Levels
On a Keypad with a display screen, a battery level indicator is located at the bottom-right of the screen. The battery level
indicator shows 5 levels of battery power. Additionally, on a Display Keypad, indications will be made when the battery
level reaches low level and again when it reaches the critical low level.
On a non-display Keypad, the Buzzer and LED indicates the battery level. If the Buzzer Mode is Off, there will be no
sound indications. The LA GARD Software client reports battery levels in Entries and Locks with an Audit transaction.
Note: If the Keypad is using an AC Adapter, then the battery level indicator will always be at high.
3.12.1 Low Battery Warning
3.12.1.1 Low Battery Warning – Display Keypad
When using a Keypad with a display screen, on wake-up key press, the Keypad will emit 2 high beeps and 2 green LED
flashes followed by 2 low beeps and 2 red LED flashes. Low Battery will also be displayed on screen on wake-up and at
the end of an open sequence. The batteries need to be replaced immediately to ensure continued and safe operation of
the device.
3.12.1.2 Low Battery Warning – Non-Display Keypad
When using a Keypad without a Display screen, on wake-up key press and/or after an open sequence, the Keypad will
emit 2 high beeps and 2 green LED flashes followed by 2 low beeps and 2 red LED flashes. The batteries need to be
replaced immediately to ensure continued and safe operation of the device.
3.12.2 Critical Low Battery Warning
3.12.2.1 Critical Low Battery Warning – Display Keypad
When using a Keypad with a Display screen, on wake-up key press, the Keypad will emit 3 high beeps and 3 green LED
flashes followed by 3 low beeps and 3 red LED flashes. Critical Low Battery will appear on screen with a critical low
battery indicator if enough power remains. The System will not respond to any other commands until the battery is
replaced.
To Next Page