dormakaba USA Inc. System User Guide 7040.0321 | 40
Set Duress for
system
enable/disable
#14<Master
PIN><0:disabled,1:enabled>
<rtn key>
Master ID = 00, master combo is
12345678. 1= enable
Master ID = 00, Master combo is
12345678.
Master ID = 00, Master combo is
12345678.
Reset Lock w/
Master combo
Master ID = 00, Master combo is
12345678.
User id = 03, combo is 123456; User
must be authorized to perform
command.
Master ID = 00, Master combo is
12345678
#40<Auth
PIN><0:off,1:on><rtn key>
User id = 03, combo is 123456. 1=on.
User must be authorized to perform
command.
#41<Auth
PIN><0:off,1:on><rtn key>
User id = 03, combo is 123456. 1=on.
User must be authorized to perform
command.
#50<Auth PIN><new user
PIN><user type><user lock
privileges><rtn key>
<Auth PIN>: Authorized
User to execute command
<new user PIN>: Initial PIN
of user being added
<user type>:2=Standard
User, 4=Manager User
<user lock privileges> see
Note
#50031234560465432125<r
tn key>
User Lock Privileges:
1 - Open Lock Only
2 - Audit Lock only
3 - Open + Audit Lock
5 - Open + TDO Combination
7 - Open + Audit + TDO Combination
Example: 03 user with 123456 combo
wants to add user 04 with initial combo
654321 as a standard user (2) and
Open prev and TDO priv when entering
credentials.
If target new user already exists, it will
result in error. If Auth PIN cannot
create user desired, error.
The user will default to Enabled with
this command. If the intent is to disable
this user initially, then the #54
command should be immediately
followed for this user.
Auth user must be authorized to
perform command.
#52 <Auth PIN><New
PIN><Confirm PIN><rtn
key>
#5203123456036543210365
4321<rtn key>
User ID = 03, initial combo is 123456,
new combo is 654321. The 2 new
PINS must match. The ID portion of
new PIN must match the ID of the Auth
PIN