Cleaning
1. Turn off the monitor and unplug the power cord from the AC outlet.
2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic
cloth, for example microfiber.
3. When dealing with more than dust, use a cleaning solution specifically designed
for LCD panels to dampen your cloth. Wipe the screen gently and in small circles
avoiding pressure.
IMPORTANT: Never spray the cleaning solution directly on the device, as it
may run behind the bezel and damage the electronics.
4. For more difficult cleaning situations, use a 50/50 mix of water and isopropyl
alcohol to dampen your cloth. Wipe the screen gently and in small circles avoiding
pressure.
IMPORTANT: Never spray the cleaning solution directly on the device, as it
may run behind the bezel and damage the electronics.
IMPORTANT: Do not use cleaners that contain any petroleum-based
materials such as benzene, thinner, or any volatile substance to clean the
monitor screen or cabinet. These chemicals may damage the monitor and
cause permanent discoloration.
5. Make sure the screen and cabinet are completely dry before using the monitor
again.
To Next Page
Loading...
Need help?
General
