Dover HEIL DuraPack Python - Page 134

Issued July 2024
Body Controller Softw are
Copyright 2024, The Heil Co.
Printed in the U.S.A.
Body Controller Software
128
B04 Throttle Advance Switch (Input %IX0.06)
This circuit monitors the ON/OFF status of the tailgate Throttle Advance Switch. This circuit is used only on a MULTIPACK unit.
Related Option Configurations
Selected Truck
Status
Functionality
Multi-Pack
-
Input %IX0.06 Is Used as Throttle Advance Switch.
Function Logic:
Input Device
Status
I/O Address
Status
Throttle Advance Extend Switch
Activated
%IX0.06
ON
B05 Lift Raised Proximity Switch (Input %IX0.06)
This circuit monitors the ON/OFF status of the Lift Raised proximity switch. This circuit can be used only in 7000 (O.I.G.A.I / O.I.N)
units. This input is ON when the Lift is in Raised position.
Related Option Configurations
Option
Status
Functionality
Selected Truck Type
7000 OIN
Input %IX0.06 Is Used as Lift Raised Prox.
Selected Truck Type
7000 OIGIA
Input %IX0.06 Is Used as Lift Raised Prox.
Function Logic:
Input Device
Status
I/O Address
Status
Lift Raised Proximity Switch
Activated
%IX0.06
ON
B06 Travel Position Switch (Input %IX0.13)
This circuit is not used.
Related Option Configurations
Option
Status
Functionality
Packer Travel Position
ON
Input %IX0.13 Is Used as Travel Position Switch
Function Logic:
Input Device
Status
I/O Address
Status
Packer Travel Position Switch
Activated
%IX0.13
ON
B07 Transmission Temp. Signal (Input %IX0.13)
This circuit monitors the transmission temperature warning indicator output from the Allison ECU. This ECU output normally turns
ON when the transmission sump fluid temperature reaches 250 F which turns OFF the input to the control.
Related Option Configurations
Option
Status
Functionality
Packer Travel Position
OFF
Input %IX0.13 Is Used as Trans. Temp. signal
Function Logic:
Input Device
Status
I/O Address
Status