Dover HEIL DuraPack Python - Page 143

Issued July 2024
Body Controller Softw are
Copyright 2024, The Heil Co.
Printed in the U.S.A.
Body Controller Software
137
Note: With conditions (A) true, conditions (B OR C OR D OR E OR F) will engage the pump within the speed parameters.
11 In Cab Alarm (Output %QX0.15)
This output function controls the Cab Alarm circuit.
Related Option Configurations
Option
Status
Functionality
Selected Truck Type
Multipack OIGAI
Input %IX2.01 Is Used as Tailgate Buzzer Switch
Body Raise Ind
ON
Input %IX2.01 Is Used as Dump Body Down Prox.
Conditions Necessary to activate the circuit;
Condition
Logic
Function or Component
Status
I/O
Address
Status
A
-
Critical Fault
Active
N/A
N/A
OR
System Fault
Active
N/A
N/A
OR
B
-
Selected Truck Type
Multipack OIGAI
ON
N/A
AND
Tailgate Buzzer PB
Activated
%IX2.01
OFF
OR
C
-
Selected Truck Type
Multipack OIGAI
OFF
N/A
AND
Body Raise Ind
ON
N/A
N/A
AND
Body Down Prox.
Deactivated
%IX2.01
OFF
OR
D
-
Lift Extend Indicator
Activated
%QX0.09
ON
AND
Chassis Service Brake
Deactivated
%IX2.04
OFF
AND
Chassis Neutral Signal
Deactivated
%IX1.04
OFF
OR
E
-
System Power Switch
Deactivated
%IX0.15
OFF
AND
Hydraulic Pump Enable PB
Enabled
%IX1.05
ON
OR
-
Packer Extend PB
Activated
%IX0.14
ON
AND
Engine Speed Out of Range
N/A
N/A
N/A
OR
D
Tailgate Closed Prox.
Deactivated
%IX0.03
OFF
Note: Multiple items will cause the In-Cab Alarm to chime continuously. See section 6.04.01 and 6.04.02 for more information on critical
and system alarms.
4.04: Multi-Function Outputs