SECTION 4 - TECHNICAL INFORMATION
4-26
SmartDate 5 08/08
SmartDate 5s Shuttle printer
The position of the print module on the SmartDate 5s shuttle version is fixed and a
micro-switch is used to determine the hand of the printer.
The shuttle is moved to the appropriate position for a left or right hand machine.
Power up
On power up the printer establishes the following information:
• The printer hand.
• The diameter of the ribbon reels.
• The tension of the ribbon.
• The required position for the shuttle.
Cassette Removal
If the cassette is removed and replaced the printer establishes the following:
• The datum position of the shuttle.
• The diameter and tension of the ribbon.
To Next Page
Loading...