SECTION 3 - MAINTENANCE
3-33
SmartDate 5 06/08
3.18 Changing the Cassette Hand
If the printer hand is changed the handing of the associated cassette must also be
changed.
Below is an example of how to re-hand the shuttle cassette, the procedure for the
combined cassette is the same.
1. Use a 11 mm spanner to undo the
ribbon take up reel from the cassette
body.
2. Repeat this operation for the ribbon
supply reel.
3.Re - fit the take up and supply reels on
the opposite sides of the cassete body.
To Next Page
Loading...