Dover markem-imaje SmartDate 5 - SmartDate 5 - Continuous Mode and SmartDate 5 s; Printing Time - Continuous Printers; Print Cycle Time - Continuous Printers

SECTION 2 - SETUP AND TIMING ISSUES
2-15
SmartDate 5 08/08
2.8.5 SmartDate 5 - Continuous Mode and SmartDate 5s
The timing on the continuous printers is slightly different. It is not the Print Time
that is the critical timing but generally the Repeat Time.
2.8.6 Printing Time - Continuous Printers
The Printing Time (in the Timing menu) consists of the following:
• Head Out time
• Start Border
• Print (Print speed set by Encoder)
• End Border
• Head In time
2.8.7 Print Cycle Time - Continuous Printers
On receipt of a print signal the whole print cycle is as follows:
• Debounce Distance
• Print Delay
• Head Out time
• Start Border
• Print (Print speed set by Encoder)
• End Border
• Head In time
• Return Speed