Dover markem-imaje SmartDate 5 - Printing Time - Intermittent Printers; Print Cycle Time - Intermittent Printers

SECTION 2 - SETUP AND TIMING ISSUES
2-14
SmartDate 5 08/08
2.8.3 Printing Time - Intermittent Printers
The Printing Time (in the Timing menu) consists of the following:
• Head Out time
• Start Border
• Print (Print speed set in Controller)
• End Border
• Head In time
On a SmartDate 5 Intermittent this time MUST be less than the dwell time for the
application to work.
2.8.4 Print Cycle Time - Intermittent Printers
On receipt of a print signal the whole print cycle is as follows:
• Debounce Time
• Print Delay
• Head Out time
• Start Border
• Print (Print speed set in Controller)
• End Border
• Head In time
• Return Speed