SECTION 3 - MAINTENANCE
3-27
SmartDate 5 06/08
3.16 Changing the Printer Hand - Combined Printer
Note: We strongly recommend that re-handing of the printers should not be
attempted by anyone who has not received the relevant training from
Markem.Imaje.
Switch off and disconnect the power to the machine.
Disconnect the printer from the controller and remove the side covers.
New Images required without Micro switches
1. Remove the four retaining screws
from the print module.
2. Pull the module upwards off the key
and move it out of the way.
3. Remove the printhead cable cover
plate, and place to the side.
4. Move the printhead cable and pipes
to the opposite side.
To Next Page
Loading...