SECTION 4 - TECHNICAL INFORMATION
4-47
SmartDate 5 08/08
4.8.7 Printer PCB
The SmartDate 5 printer PCB is located in the printer unit.
The printer PCB controls the printhead signals, motor movement and solenoid
actuation inputs and outputs.
The Continuous shuttle version of the printer interfaces with a speed encoder for
matching of print speed.
It is connected to, receives power from and communicates with the Controller unit
via a single multi-core cable.
The printer board has its own Micro-controller which communicates with the Main
Controller unit and a PLD (Programmable Logic Device).
To Next Page
Loading...