Dover markem-imaje SmartDate 5 - Printer PCB Test Points; Printer PCB Fuse

SECTION 4 - TECHNICAL INFORMATION
4-50
SmartDate 5 08/08
4.8.10 Printer PCB Test Points
The printer PCB Test points are listed below:
Table 4– 2: Printer PCB Test Points
Test Point Function
TP1 +45VCP (Controller to Printer)
TP2 +5V (Logic)
TP3 0VCP
TP4 +VPH (Printhead “Variable” Voltage)
TP5 0VPH
TP6 +3.3V (Logic)
TP7 +2.5V (Logic)
TP8 0V (Logic)
TP9 0V (Logic)
TP10 0V (Logic)
TP29 +24V (Encoder)
4.8.11 Printer PCB Fuse
The printer PCB has two thermal resettable fuse F1 and F2.