SECTION 2 - SETUP AND TIMING ISSUES
2-17
SmartDate 5 08/08
To record a Speed Profile on the SmartDate 5 Continuous or SmartDate 5s, the
following conditions apply:
• The Printer must be connected to the controller.
• The Encoder must be set to External - Quadrature or External - Pulse Train
• The Controller must be connected to a SmartTouch unit or a PC running the
PC Tools application.
Two other options must be set up;
• The Resolution (how often the substrate speed is recorded)
• The Trigger (The action that will initiate the Speed profile)
To access the first of these options:
1. From the Engineering menu screen select Settings.
6. Diagnostics
Menu
4. Digital I/O Control
SelectBack
5. Settings
To Next Page
Loading...