Dover markem-imaje SmartDate 5 - Page 33

SECTION 2 - SETUP AND TIMING ISSUES
2-19
SmartDate 5 08/08
6. Select Encoder Type by pressing the right button.
2. Encoder Direction
3. Encoder Resolution
Menu
1. Encoder Type
SelectBack
7. Ensure that the Encoder type is set to External - Quadrature or External -
Pulse Train
8. Select Back by pressing the left button.
9. Use the bottom Quad button to scroll to Speed Profile Recorder.
10. Select Speed Profile Recorder by pressing the right button.
11. The Speed Profile Recorder screen is displayed.
2. Trigger
Menu
1. Resolution
SelectBack
12. Configure the two options to the preferred requirements.