Dräger Narkomed 2C - NVRAM Dump Screen

DIAGNOSTICS (continued) NM2C
2.6 NVRAM Dump Screen
TheNVRAMDumpScreendisplayslocationsofnon-volatilememory(processor
status registers). This screen is shown in Figure 2-8.
To enter this screen from the Main Service Screen, highlight NVRAM DUMP
(ref. Figure 2-3) with the selection wheel and press the trigger.
To obtain a printout of this screen, press the trigger (with PRINT highlighted).
The register contents will be dumped to the printer port at 9600 baud.
To return to the Main Service Screen, select EXIT and press the trigger.
NVRAM DUMP
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
F0F0F0F0 F0F0F0F0 F0F0F0F0 F0F0F0F0
F0F0F0F0 F0F0F0F0 F0F0F0F0 F0F0F0F0
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
40203044 40203044 40203044 40203044
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
F0F0F0F0 F0F0F0F0 F0F0F0F0 F0F0F0F0
F0F0F0F0 F0F0F0F0 F0F0F0F0 F0F0F0F0
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
40203044 40203044 40203044 40203044
42443322 42443322 42443322 42443322
FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
PRINT
EXIT
SELECTS
FUNCTION
⇒ ACTIVATES
FUNCTION
Figure 2-9: NVRAM DUMP SCREEN
Rev. G
2-8
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS