NM2C SPARE AND REPLACEMENT PARTS (continued)
ITEM DESCRIPTION PART NUMBER
44 Display Arm Assembly .......................................4112524
Later Replaced by .......................................4112591-001
45 Cap, Plastic ..............................................4111184
46 Mounting Screw ........................................4111199-004
47 Lockwasher .............................................HW65010
48 Spacer (2x) ............................................4110792-045
49 Bearing .................................................4111181
50 Spacer, Delrin .........................................4110792-044
Cable Clamp, in. (3x) .....................................4112300
Screw, Cable Clamp, 6-32 x (3x) ............................HW09000
51 Screw, ¼-20 x in. Btn Hd Skt (6x) ............................HW09063
[If the machine is equipped with an optional manual sphygmomanometer,
the lower front corner mounting screw is a ¼-20 x 2 in. P/N HW09064]
52 Lock Washer, ¼ split (6x) ....................................HW65010
53 Datagrip Assembly ..........................................4111907
54 Display Assembly ...........................................4112314
Rev. A
8-9
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS