Dräger Narkomed 2C - Page 28

TROUBLESHOOTING GUIDE (continued) NM2C
GUIDE 9: No Datagrip Response
N
N
Y
N
Y
Y
N
Y
N
Y
N
Y
START
CONTACT NAD
SERVICE DEPT.
UNIT IS
FUNCTIONAL
DOES UNIT
PASS PMS?
REINSTALL ORIGINAL
PROCESSOR ASSEMBLY
PERFORM A
COMPLETE PMS
ON UNIT
IS
DATAGRIP WORKING
PROPERLY?
RECONNECT ORIGINAL
DATAGRIP ASSEMBLY
-------------------------------------
REPLACE
PROCESSOR ASSEMBLY
AS OUTLINED IN
SECTION 4
REPLACE
DATAGRIP ASSEMBLY
AS OUTLINED IN
SECTION 4
IS
DATAGRIP WORKING
PROPERLY?
SUBSTITUTE ANOTHER
DATAGRIP ASSEMBLY
IS
DATAGRIP WORKING
PROPERLY?
CHECK POWER
SUPPLY VOLTAGES,
REPLACE POWER
SUPPLY IF OUT OF
TOLERANCE
CONNECT
DATAGRIP CABLE TO
PROCESSOR PORT J3
IS
DATAGRIP CABLE
CONNECTED?
IS
DATAGRIP WORKING
PROPERLY?
3-12
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS