REPLACEMENT PROCEDURES (continued) NM2C
4.9.12 Perform the ORC adjustment procedure given in Section 5 of this
manual.
NOTE: There are two adjustment procedures - one for ORC P/N 411800, and
one for low flow ORC P/N 4113229. Be sure to follow the correct
procedure.
4.9.13 Reinstall the flowmeter housing rear cover.
4.9.14 Perform the PMS Procedure given in Section 6.
Rev. D
4-32
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
To Next Page
Loading...
