Instructions for Use Oxylog 3000 SW 1.n 121
Technical Data
Technical Documentation for the Oxylog 3000 according to EMC standard
IEC/EN 60601-1-2
General Information
The EMC conformity of the Oxylog 3000 includes the use of following external cables, transducers and
accessories:
AC/DC power pack 100 - 240 V / 50 - 60 Hz
DC/DC Converter
All-round Wall holder
Quick Power Connector
Carrying System
Refer to the "List of Accessories" on page 133 for additional information.
Additionally, accessories may be used, which do not affect EMC compliance, if no other reasons contradict
the use of them. The non-observance may result in increased emissions or decreased immunity of the
Oxylog 3000.
The Oxylog 3000 should not be used adjacent to or stacked with other equipment; if adjacent or stacked
use is inevitable, the Oxylog 3000 should be observed to verify normal operation in the configuration in
which it will be used.
To Next Page
Loading...
Need help?
General
