DQD 507 Rev. 2012-05-22 Page 1
Certificate of Compliance
Certificate: 1562835 (097594_0_000) Master Contract: 160220
Project: 70055569 Date Issued: 2016-10-17
Issued to: Draeger Safety AG & Co. KGaA
Revalstrasse 1
Luebeck, 23560
GERMANY
Attention: Thomas Treptow
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
PRODUCTS
CLASS - C482801 - SIGNAL APPLIANCES --Combustible Gas Detection Instruments-For Hazardous Locations
CLASS - C482881 - SIGNAL APPLIANCES-Combustible Gas Detection Instruments-For Hazardous Location-
Certified to U.S. Standards
For details related to rating, size, configuration, etc. reference should be made to the CSA Certification Record or
the descriptive report.
Class I, Groups A, B, C and D; Class II, Groups E, F and G:
Model P3S, stationary, input rated 30 V dc max., 0.3 A max., intrinsically safe with entity parameters when
installed in accordance with Draeger Control Drawing No. SE20106. May be used with duct extension.
Temperature Code T4 for ambient temperatures of –40 Deg. C to +65 Deg C. Temperature Code T6 for ambient
temperatures of –40 Deg. C to +40 Deg C.
Model P3U, stationary, input rated 30 V dc max., 0.3 A max., intrinsically safe with entity parameters when
installed in accordance with Draeger Control Drawing No. SE20106. May be used with duct extension, P3U
Remote Adapter, P3U Remote Sensor and Dongles. Temperature Code T4 for ambient temperatures of –40 Deg.
C to +65 Deg C. Temperature Code T6 for ambient temperatures of –40 Deg. C to +40 Deg C.
To Next Page
Loading...
Need help?
General