Dräger Polytron 7000 User Manual

57
The menu » Information «
Submenu » Datalogger «
The submenu » Datalogger « contains the functions for interrogating the
Datalogger.
Datalogger status
This function is active only if the Polytron 7000 transmitter is equipped with
the data dongle 83 17 618, see page 30.
— This function displays the status of the Datalogger and the Eventlogger.
 Select the menu items » Information «, » Datalogger « and » Datalogr
status « in this order, pressing the » « key after each selection.
— The current status of the Datalogger and the Eventlogger is displayed:
— Activating / deactivating the Datalogger: see page 79.
— Activating / deactivating the Eventlogger: see page 79.
Show graph
This function is active only if the Polytron 7000 transmitter is equipped with
the data dongle 83 17 618, see page 30.
— The measured values of the sensor are displayed graphically on a time axis
of 15 minutes.
 Select the menu items » Information «, » Datalogger « and » Show graph «
in this order, pressing the » « key after each selection.
Datalogr. : on or off (the Datalogger is on or off)
Evntlogr. : on or off (the Eventlogger is on or off)
OK
OK

Dräger Polytron 7000 Specifications

General

Brand	Dräger
Model	Polytron 7000
Category	Adapter
Language	English