Dräger Polytron 7000 User Manual

The menu » Settings «
62
The menu » Settings «
The menu » Settings « contains all functions needed for individual configura-
tion of the unit.
Overview
Information
Calibration
Settings Settings
Instrument
page 63
Instrument
Communication
page 70
Pump
1)
1) This menu function can be executed only if the Polytron 7000 transmitter is equipped with a pump module, see page 34.
page 63
Sensor
page 76
Alarm
2)
2) This menu function can be executed only if the Polytron 7000 transmitter is equipped with a relay module, see page 32.
page 64
Datalogger
page 79
Passwords
page 67
Date and time
page 67
Time format
page 68
Language
page 68
Function key
page 68
Device init
page 68
SW Dongle
page 69
Communication
Hart interface
3)
3) This menu function can be executed only if the Polytron 7000 transmitter is equipped with the appropriate interface card.
page 70
Analogue interface
3)
page 71
LON Interface
3)
page 75
PA/FF Interface
3)
page 76
Sensor
Change sensor
page 76
Set Autocal.
page 77
Sensor test
page 77
Sensor lock
page 77
EC–H
2
S
4)
4) The sensor shown in the overview serves only as an example and may differ from the sensor actually installed in the unit.
page 78
Datalogger
Datalogr. on/off
5)
5) This menu function can be executed only if the Polytron 7000 transmitter is equipped with the data dongle 83 17 618, see page 30.
page 79
Cfg Datalogger
5)
page 79
Clear Datalogger
5)
page 81
Clear Eventlogr.
5)
page 81

Dräger Polytron 7000 Specifications

General

Brand	Dräger
Model	Polytron 7000
Category	Adapter
Language	English