The menu » Settings «
68
Time format
— This function is used to set the display format for the date and/or time.
Select the menu items « Settings «, « Instrument « and « Time format « in
this order, pressing the » « key after each selection.
Select the desired input line (Date format or Time format) and press the
» « key to switch to edit mode.
Use the » « and » « keys to select the desired format (European or
US) and press the » « key to confirm the setting.
Language
— This function is used to set the language for the menus.
Select the menu items « Settings «, « Instrument « and « Language « in
this order, pressing the » « key after each selection.
Select the desired language from the list and press the » « key to acti-
vate.
Function key
— This function is used to set the function which is to be activated when the
function key (the » « key) is pressed briefly.
Default setting: Fault report.
Select the menu items » Settings «, » Instrument « and » Function key « in
this order, pressing the » « key after each selection.
Select the desired function and press the » « key to activate. An icon
corresponding to the selected function appear on the right side of the dis-
play. Possible selections:
— In measuring mode, briefly pressing the » « key will now activate the
selected function.
Show graph– the measured values are displayed on a time axis,
see page 57
Fault report – existing faults are displayed in clear text, see page 55
Notice
report
– existing warnings are displayed in clear text, see
page 55
Fault codes – existing fault codes are displayed in a numerical table,
see page 55
OK
M
OK
To Next Page
Loading...
Need help?
General