Dräger Polytron 7000

81
The menu » Settings «
– Stack/roll
— This function can be used to set the operating mode of the Datalogger and
the Eventlogger.
 Select the menu items » Settings «, » Datalogger «, » Set Datalogger «
and » Stack/roll « in this order, pressing the » « key after each selection.
 Select » Stack « or » Roll « and press the » « key to activate (» «).
Clear Datalogger
— This function is used to delete all data from the Datalogger.
 Select the menu items » Settings «, » Datalogger « and » Clear
Datalogger « in this order, pressing the » « key after each selection.
— The message » Clear Datalogger data « is displayed.
 Use the » « key to select the line » Confirm « and press the » « key.
— The data are deleted from the Datalogger.
Clear Eventlogger
— This function is used to delete all data from the Eventlogger.
 Select the menu items » Settings «, » Datalogger « and » Clear
Eventlogger « in this order, pressing the » « key after each selection.
— The message » Clear Eventlogger data « is displayed.
 Use the » « key to select the line » Confirm « and press the » « key.
— The data are deleted from the Eventlogger.
Roll when the Datalogger storage space is use up, the oldest
data will be overwritten first
Stack when the Datalogger storage is full, no further data can be
saved. An appropriate warning is generated.
OK
OK
OK
M
OK
OK
M
OK