Draytek Vigor2912 Series - Page 126

Vigor2912 Series User’s Guide
116
Interface
Specify the WAN interface(s) which will apply the DHCP
option setting.
Option Number
Type a number for such option.
DataType
Choose the type (String or Raw Byte in Hex) for the data to
be stored.
Data
Type the content of the data to be processed by the function
of DHCP option.
Add
Create a new entry and display on the Option List table.
Update
Edit the existing entry.
Delete
Remove the existing entry.
After finished the above settings, click OK to save the settings.