VigorAP 900 User’s Guide
185
(1) Please tick Enable Wireless LAN.
(2) Choose the Mode.
Note: To utilize the Universal Repeater Mode on AP900, it’s required not to
choose 11a mode here on 2830n.
(3) Name a SSID.
(4) Choose a channel.
Note: To avoid signal interference, it’s suggested to do a Scan in Wireless
LAN >> AP Discovery, and choose an unoccupied or not-so-crowded channel.
(5) Click OK.
2. Setting the Security. Please go to Wireless LAN >> Security.
(1) Choose the Mode.
(2) Give a Pre-Shared Key.
Note: The Mode and Pre-shared Key will be needed when setting on AP800,
and it’s suggested to memorize them.
(3) Click OK.
To Next Page
Loading...
