17 of 36
User Manual - ProVideo GUI v1.2.4
1. In the folder where the “ProVideo.exe” is extracted a folder named
“tools_and_configs” is placed. Open the folder and the contained file
“SupportedLenses.txt”.
2. Add a new entry for your lens.
3. Increment the number of templates at to top of the document.
4. Restart the GUI for the changes to take effect.
Note:
1. The Elements “Step Mode” and “Torque” are not shown in this picture. The use of
them is like the speed box.
2. If an option is not visible, this option is not supported by the connected lens.
3. Changing the advanced options can cause, that the lens driver is not working as
expected.
4.3 Playback Tab
This tab is only available for the ATOM one SSM500 in Trigger Mode.
To Next Page
Loading...
