Need help?Do you have a question about the Drivecon VF61 and is the answer not in the manual?
Essential safety guidelines for operating the inverter, including voltage, grounding, and modifications.
Recommendation to protect set data against rewriting to prevent misuse.
Instructions for verifying the VF61 unit, accessories, and spare parts upon receipt.
Overview of the inverter's physical structure and components, including appearance. Details on opening the front cover are provided.
Details on unsuitable installation environments and guidelines for vertical installation, including cooling space requirements.
Diagrams for circuit construction, terminal blocks, and safety precautions for wiring connections.
Tables for I/O device selection, wire sizes, notes, and safety precautions for peripheral connections.
Overview of the console's LCD display, keys, and their functions for operation and mode selection.
How to enter and navigate the monitor mode to view operating parameters and status, including the displayed code list.
Accessing and modifying internal settings, changing data, and recommendations for data recording.
Explanation of different operation modes like REM, DIR, FOR/REV, JOG, START/STOP.
Procedure for setting a switch to protect the inverter's data from unauthorized changes.
Crucial safety advice regarding connecting the motor to ground during automatic measurement.
Steps to manually input motor parameters from its nameplate into the inverter.
Detailed procedure for performing automatic motor measurement using the inverter's function.
Basic instructions on connecting the inverter's output terminals to the motor.
Setting fundamental operational parameters like frequency and start/stop modes.
How to perform normal operation and jogging using the console.
Instructions for operating the inverter using external signals via the terminal block.
Table of error codes, messages, and their corresponding causes and countermeasures.
A flowchart for diagnosing issues when the motor fails to run, including safety precautions.
Guides to diagnose and resolve various error flashes including OC, OU, IOB, L, F, and OH issues.
Advice on operating the inverter during phase failures to prevent reduced service life.
Guidelines for performing regular inspections to maintain inverter performance.
Critical safety steps to follow before performing any inspection or maintenance.
Procedure for testing the inverter's insulation resistance using a megger.
Important precautions to take when replacing a printed circuit board.
Instructions on how to dispose of replaced parts and spare parts.
List of basic setting parameters, their ranges, default values, and changeability.
Details on special settings, including frequency limits, external references, and fault settings.
Parameters related to torque limits, braking torque, and DC brake settings.
Settings for jump frequencies, S-shape acceleration/deceleration, and program operation.
Settings for program operation time units and acceleration/deceleration selections.
Configuration of multifunction inputs and outputs, including frequency detection and alarm codes.
Detailed settings for 4-20mA outputs, insulated inputs, and ASR parameters.
Special settings for motor parameters, voltage, current, and FCL level.
Introduction to the isolator boards, their functions, and compatibility with VF61 drives.
List of basic program settings for VF6100 Standard drives, mapping terminals to functions.
Program list for VF61V/S Flux Vector drives, mapping terminals to functions.
Specifications for the input isolator boards, including input levels, relay outputs, and environmental ratings.
To Next Page
General