Dru Virtuo Evolve 100 - Placing the Log Set Virtuo 100

28
8.5.1 Installing the wood set Virtuo Evolve 100
3 Place the logs exactly in accordance with the following description in order to achieve a correct alignment of the ame
picture and the logs.
Step 1
Carefully remove the wood set from their packaging. The wood set consist of the following:
- Wood set (g. 8-8)
- Glowing embers (g. 8-9)
- Coals (g. 8-10)
- Chips (g. 8-11)
- Wood chips (g. 8-12)
2 When identifying logs A to H (g. 8-8), use the color, size and burn marks on the logs.
3 Log B and C look similar, pay close attention to the location of the positioning cams! (g. 8-8)
38P-0608-1
8-9
38P-0845/2
8-10
8-8
8-11
8-12
installatie- en gebruikershandleidinginstallatiehandleidingInstallation manual