9
6.2 Electric connection
The appliance is provided with a tie-wrap to create a strain relief for the mains cord. This is to prevent the cord from
unintentionally coming loose from the appliance. The strain relief is installed as follows:
1
Take the accompanying mains cord and connect it to the rear of the appliance with the three-pole plug (g. 6-1).
1
Take the provided tie-wrap and lead it through the slots intended for that purpose above the connection. (g. 6-1).
1
Attach the mains cord to the appliance with the tie-wrap and tension the tie-wrap so that the mains cord
can no longer shift.
1
Connect the appliance to the mains by inserting the plug in the socket.
3
After installation, the socket to which the appliance is connected should be accessible at all times.
3
- Make sure that, in addition to the main switch on the appliance, it is easy to make the appliance free from voltage.
- For instance by disconnecting the plug or using a 2-pole switch placed by a recognised installer in accordance with
normal regulations.
- When performing maintenance or repairs, make sure that the appliance is disconnected from the power source.
- If the mains plug is damaged, it should be immediately replaced by a qualied person.
- Do not use the appliance before the electric installation has been completed.
6-1
installatie- en gebruikershandleidingInstallation manual
To Next Page
Loading...
