Dru Virtuo Evolve 100 - Preparation; Removing the Packaging

8
6. Preparation
6.1 Unpacking
Note the following items when removing the packaging:
1 Remove all packaging and protective materials.
1 Remove all supplied components in, on and/or at the appliance.
1 Check the appliance and accessories for damages (during transport).
1 If necessary, contact your supplier.
1 Never install an appliance that is damaged!
1 Remove screws that are used to x the appliance to the pallet.
1 Packaging must be disposed of by means of the applicable separation methods.
3 Keep plastic bags away from children.
3 Protect the monitors and other electric components against (building) dust and (building) damp!
Table 6-1 indicates which components should be available after removing the packaging.
1 Contact the supplier if you nd that not all components have been supplied.
1 Packaging must be disposed of in accordance with the regulations.
Table 6-1: Parts included with the delivery
Virtuo Evolve 100,
Virtuo Evolve 100/3
Virtuo Evolve 130,
Virtuo Evolve 130/3
Virtuo Evolve 180,
Virtuo Evolve 180/3
Part Number Number Number
User manual 1x 1x 1x
Installation manual 1x 1x 1x
Logs and chips 1x 1x 1x
Wood chips set
1x 2x 2x
Glowing ember set (embers and coals) 1x 1x 1x
Remote control 1x 1x 1x
Penlite batteries (AAA) 2x 2x 2x
Suction cup (Virtuo) 2x 2x 2x
Backup self-tapping screw/ange nut Nx Nx Nx
Metal triangle (three sides)
2x 2x 2x
Monitors
1x 2x 2x
Socket spanner
1x 1x 1x
installatie- en gebruikershandleidingInstallation manual