55
9. Final check
For a good and safe operation of the appliance, the following checks must be performed prior to commissioning.
1
Familiarise the end user with the appliance. Instruct him about using it for the rst time, the safety measures, how the
remote control works and the recommended annual maintenance. For more information, see the user manual.
3
- Tell the user to remove the plug from the socket in case of malfunctions/poor operation and contact the installer to
prevent unsafe situations.
- Do not use the appliance before the installation has been fully completed.
Some aspects to consider when explaining the operation and functions of the appliance to the end user:
1
The end user knows where to nd the main switch of the appliance.
1
The location of the socket to which the appliance is connected is known to the end user.
1
The remote control and its functions have been explained to the end user.
1
The end user knows that a chimney breast with plastering should dry for at least 6 weeks before the heating
element can be used.
1
Cleaning the exterior of the glass panes has been explained and/or demonstrated to the end user.
1
The manual has been handed over to the end user and is stored with the appliance.
Installation manual
To Next Page
Loading...
